Explore

السابق التالي

حقائق واحصائيات

التدريسيين

الفروع العلمية

التخصصات

طلبة الدراسات الاولية

طلبة الدراسات العليا

ألمزيد...

حقائق واحصائيات

التدريسيين

الفروع العلمية

التخصصات

طلبة الدراسات الاولية

طلبة الدراسات العليا

ألمزيد...

Explore

البحوث المنشورة في المجلات العلمية المحكمة 2018

العدد	البحوث العلميـــة المنشـــورة لعام 2018	التحميل هنا
1	Ahmed Abdulnabi Imran, Nabeel Sameer Mahmoud, Hayder Mohammad Jaffal, "Numerical and Experimental Investigation of Heat Transfer in Liquid Cooling Serpentine Mini-Channel Heat Sink with Different New Configuration Models", Thermal Science and Engineering Progress 6 (2018) 128–139.
2	Hasanain A. Abdul Wahhab, A. Rashid A. Aziz, Hussain H. Al-Kayiem, Mohammad S. Nasif, Maymeen N. Reda. "Application of Electromagnetic Induction Technique to Measure the Void Fraction in Oil/Gas Two Phase Flow", IOP Materials Science and Engineering, 328 012030 (2018).
3	Hussain H Al-Kayiem, Hasanain A. Abdul Wahhab, Elena Magaril, A. Rashid A. Aziz, "Performance and emissions investigation of a single cylinder diesel engine using enhanced blend biodiesel by nanoparticles", AIP Conference Proceedings,: 2035(1) (2018).
4	Hasanain A. Abdul Wahhab, A. Rashid A. Aziz, Mohammed El-adawy, Mhadi A. Ismael, Firmansya, "Effect of Rotating Burner Rim on Flame Stabilization: Blow-off and Flash Back", International Journal of Engineering and Technology, 7(2018), 230-233.
5	Hasanain A. Abdul Wahhab, A. Rashid A. Aziz, Hussain H. Al-Kayiem, Mohammad S. Nasif, Mohammed El-Adawy, "Magneto-hydrodynamics of bubbly flow in horizontal pipe: New criteria through numerical simulation", AIP Conference Proceedings, 2035(1) (2018).
6	Falah Alobaid, Wisa Abed Kattea Al-Maliki, Thomas Lanz, Martin Haaf, "Dynamic Simulation of a Municipal Solid Waste Incinerator", Energy 149 (2018) 230-249.
7	Talib K. Murtaha, Hussein M. Salih, Ali D. Salman, "Transient Behavior Analysis for Solar Energy Storage in PCM-CFM Material Using Equivalent Heat Capacity Method as Storage Model", Al-Khawarizmi Engineering Journal, Vol. 14, No.2, Juna, (2018).
8	Wafa Abd Soud , Riyam Abdullah Dayaa, “Vibration Response of Free and Force Analysis of a Rectangular Plate” . Journal of University of Babylon for Engineering Sciences, Vol. (26), No. (8), ,298-308,(2018)
9	Talib K. Murtadha, Hussien M. Salih, Ali D. Salman, "Transient Behavior Analysis for Solar Energy Storage in PCM-CFM Material Using Equivalent Heat Capacity Method as Storage Model", Al-Khwarizmi Engineering Journal, Vol. 14, No.2, June, P.P. 40- 57, 2018.
10	Sadeq H. Bakhy, Enass H. Falieh, Mortada A. Jabbar, "The Mechanism Analysis of Underactuated Robotic Finger For Optimum Grasping Using Gradient Descent Method", Al-Nahrain Journal For Engineering Sciences NJES Vol.21 No.1, pp.118-126, 2018.
11	Sadeq Bakhy, Enass Flaieh, Mortad Jabbar, "An Experimental Study for Grasping and Piching Controls for an Underactuated Robotic Finger Using a PID Control", 2nd International Conference on Engineering Sciences, 2018.
12	Sadeq H. Bakhy, Samir A. Amin, Fouad A. Abdullah, "Influence of SAW Welding Parameters on Microhardness of Steel A516-Gr60", Engineering and Technology Journal, Vol.36, Part A. No.10, 2018.
13	Ahmed N. Alkhazraji, "Enhancement of Mechanical Properties and Handling Characteristic of Tire Rubber Using Different Percentage of Nano Aluminum Oxide and Carbon Black", International Journal of Nanoelectronics and Materials Vol.11, No.3, July 2018.
14	Ali Alkhalaf, H. A. Refaey, Nabeh Al-durobi, E. Specht. “Influence of contact point treatment on the cross flow mixing in a simple cubic packed bed: CFD simulation and experimental validation”, Granular Matter (2018) 20-22.
15	Kamyar Mohammadpour, Ali Alkhalaf, Eckehard Specht. “CFD simulation of cross-ﬂow mixing in a packed bed using porous media model and experimental validation”, Computational Particle Mechanics (2018)
16	Dr. Ahmed Adnan AL-Qaisy, Najmuldeen Yousif Mahmood, Rasha Mohammed Hussein “Study The Microwave Energy Effects On Mechanical Properties And Estimated Fatigue Life Of Aa7075-T6” Journal of Engineering and Sustainable Development Vol. 22, No. 06, November 2018
17	A A Zainulabdeen, N Y Mahmood, J H Mohmmed “The effect of polymeric quenching media on mechanical properties of medium carbon steel” IOP Conf. Series: Materials Science and Engineering 454 (2018) 012053
18	Ahmed A. Zainulabdeen, Jabbar H. Mohmmed, Najmuldeen Y. Mahmood “Effect of Annealing Treatment on the Anisotropy Behavior of Cold Rolled Stainless Steel 304 Sheets” Diyala Journal of Engineering Sciences, Vol. 11, No. 2, June 2018, pages 84-89
19	Sadiq Jaffer Aziz, Ahmed A. Shandookh, Rafeef Jumaa Salman, "Study the Effects of Microwave Furnace Heat on The Mechanical Properties and Estimated Fatigue life of AA 7075-T73 with Oil and salt solution Treatments"", The Iraqi Journal for Mechanical and Material Engineering, University of Babylon, Vol.26, No.1, 2018.
20	Ahmed A. Shandookh, "Investigating the Effects of Microwave Furnaces Heat on the Mechanical Properties and Fatigue Life of AA6061-T6 Alloy", The Iraqi Journal for Mechanical and Material Engineering, University of Babylon, Vol.26, No.4, 2018.
21	Sadiq Jaffer Aziz, Ahmed A. Shandookh, Rafeef Jumaa Salman, " Investigation Microwave Furnace Effects on Mechanical Properties and Fatigue Life of AA 7075-T73 with Dry and Acid Treatments", Al-Khwarizmi Engineering Journal, 2018, Volume: 14, No. 2, June, Pages: 71-81.
22	Ahmed A. Shandookh, Najmuldeen Y. Mahmood, Rasha M. Hussein " Study the Microwave Heat Energy Effects on Mechanical Properties and Estimated Fatigue life of AA7075-T6", Journal of Engineering and Sustainable Development, Vol. 22, No.06, Nov. 2018.
23	Ahmed A. Shandookh, "Assembling a Smart Phone Controlled Surveillance Unmanned Quadcopter" International Conference on Engineering Technology and their Applications (IICETA), 8-9 May 2018.
24	Shaker S. Hassan, Ahmed Adnan Shandookh, Omar Alaa Ihsan " Study the Effect of Using Different Bearing Types on the Vibration of Evaporative Cooler ", Al-Nahrain Journal for Engineering Sciences, 2018, Volume: 21 Issue: 4 Pages: 532-538.
25	Sadiq Jaffer Aziz, Ahmed A. Shandookh, Rafeef Jumaa Salman, " Microwaves furnace heat effect on aluminum alloy 7075-T73 ", 2018 International Conference on Advance of Sustainable Engineering and its Application (ICASEA), 14-15 March 2018.
26	Alobaid F, Al-Maliki WAK, Lanz T, Haaf M, Brachthuäser A, Epple B, Zorbach I. Dynamic simulation of a municipal solid waste incinerator. Energy 2018; 149 (2018) 230-249.
27	Hasanain A. Abdul Wahhab, A. Rashid A. Aziz, Mohammed El-adawy, Mhadi A. Ismael, Firmansya “Effect of Rotating Burner Rim on Flame Stabilization: Blow-off and Flash Back”, International Journal of Engineering & Technology, 7 (3.17) (2018) 230-233.
28	Hussain H. Al-Kayiem, Hasanain A. Abdul Wahhab, Elena Magaril, Abdul Rashid A. Aziz “ Performance and Emissions Investigation of a single Cylinder Diesel Engine Using Enhanced Blend Biodiesel by Nanoparticles”, 6^th International Conference on Production, Energy and Reliability 2018.
29	Alaa Abdulhady Jaber, Robert Bicker, "Development of a Condition Monitoring Algorithm for Industrial Robots Based on Artificial Intelligence and Signal Processing Techniques", Internation Journal of Electrical and Computer Engineering (IJECE), Vol.8, No.2, 2018.

البحوث المنشورة في المجلات العلمية المحكمة 2019

العدد	البحوث العلميـــة المنشـــورة لعام 2019	التحميل هنا
1	Laith Al-Sadawi, Tze Pei Chong, Jung-Hoon Kim, "Aerodynamics Noise Reduction by Plasma Actuators for a Flat Plate with Blunt Trailing Edge", Journal of Sound and Vibration 439 (2019) 173-193.
2	Nawfal M. Ali, Dr.A.K. Abdul Hassan, Dr. Sattar Aljabair, "Effect of Conventional Multistage Savonius Wind Turbines on the Performance of teh Turbine at Low Wind Velocity", Jour of Adv Research in Dynamical & Control System, Vol.11, No. 11, 2019.
3	Nawfal M. Ali, Dr. Sattar Aljabair, Dr.Abdul Hassan A.K., "An Experinmental and Numerical Investigation on Darrieus Vertical Axis Wind Turbine Types at Low Wind Speed", International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol.19 No.06, December 2019.
4	Wafa A. Soud , \|Ihsan A. Baqer , Mohammed R. Ahmed ,“Experimental Study of 3D Printing Density Effects on the Mechanical Properties of the Carbon-Fiber and Polylactic Acid Specimens” Engineering and Technology Journal Vol. 37, Part A. No. 04, 2019,128-132.
5	Anwar S. Barrak, Ahmed A.M. Saleh, Zainab H. Naji, "An Experimental Study of Using Water, Methanol, and Binary Fluids in Oscillating Heat Pipe Heat Exchanger", Engineering Science and Technology, an Internationl Journal, 2019.
6	Akeel Z. Mahdi, Samir A. Amin, Sadeq H. Bakhy, "Effect of Different Friction Stir Spot Welding Techniques on the Mechanical Properties and Microstructure of Aluminum AA2024-T3", Al-Nahrain Journal for Engineering Sciences NJES 22(2), 117-123, 2019.
7	Najmuldeen Yousif Mahmood, Ali Hussein Alwan “Mechanical properties improvement of MIG welding steel sheets using Taguchi method” Australian Journal of Mechanical Engineering (2019)
8	Moayed R.Hasan, Suhad A.Rasheed, Ali Najeh Mahdi, "Experimental Study of Forced Convection Heat Transfer Porous Media inside a Rectangular Duct at Entrance Region", Journal of University of Babylon for Engineering Sciences, Vol. (27), No. (1): 2019.
9	Qasim Abbas Atiyah, Ammar Saleem Hameed, Baqer Jabbar Assi, "Vibration Analysis of Uniform and Tapered Composite Beams with Embedded Shape Memory Alloy", Journal of University of Babylon for Engineering Sciences, Vol. 27 Iss.1, 82-93, 2018.
10	Qasim Atiyah, Hasan M. Alwan, Firas hameed, "Novel approach to solve the inverse kinematics problem for a multi degree of freedom robotic arm", Journal of engineering and applied sciences, Vol.14, Iss.13, 2019 (4617-4624).
11	Qasim Abbas Atiyah, Mustafa Rahman Falih, "Experimental and Numerical Study of The Crack Position and Depth Effects on Natural Frequencies of Turbine Blades", Journal of University of Babylon for Engineering Sciences, Vol.27, Iss.3, 2019(332-344).
12	Noora Salih Ekaab, Noor Hussein Hamza, Miqdam T. Chaichan, "Performance and Emitted Pollutants Assessment of Diesel Engine Fuelled with Biokerosene", Case Studies in Thermal Engineering 13, 2019 100381.
13	Ali Hussein Alwan, “Modeling of Bending Properties of Stainless Steel 304 Sheets Welded by Tungsten Inert Gas Welding Process” Al-Khwarizmi Engineering Journal, Vol. 15, No. 4, P. P. 10- 22, 2019
14	Samir Ali Amin Al-Rabii, Lamyaa Mehdi Assad, and Ali Hussein Alwan, “Study the Influence of Gas Pressure on the Tensile Behavior of TIG Stainless Steel Sheets” Journal of University of Babylon for Engineering Sciences, Vol. (27), No. (3): 2019.
15	Alla Abdulhady Jaber, Ahmed A. M. Saleh, Hussein Fouad Mohammed Ali “ Prediction of Hourly Cooling Energy Consumption of Educational Building Using Articial Neural Network”, International Journal on Advanced Science Engineering Information Technology, Vol.9 (2019) No.1.
16	Ali Ayyed Abdul-Kadhim, Fue-Sang Lien, Eugene Yee “GPGPU Implementation of a Lattice Boltzmann Methodology for Praticle Transport and Deposition in Complex Flow”, Internaional Journal of Numerical Methods for Heat and Fluid Flow, 2019.
17	Ahmed A. M. Saleh, “Correlation of Overall Heat transfer Coefficient in The Three Zones of Wire and Tube Condenser”, Journal of Mechanical Engineering Research and Developments, 42(1)b(2019) 100-107.
18	Ahmed Abed Mohmmed, Raed Ayad Abduljabbar, “Theoretical Study of the Novel Control Strategy of Hybrid Solar Air Conditioning System”, The 10^th International Renewable Energy Congress (IREC 2019).
19	Ahmed Abed Mohmed Saleh, Sarmad Salam Abdulrasool Talib “Mathematical Modeling of Novel Indirect-Direct Evaporative Cooling unit”, ARPN Journal of Engineering and Applied Sciences, Vol.14, No. 9, May 2019.
20	Mustafa Ahmed Abdulhussain “ Study of Plate Heat Exchanger Performance Working With Three Types of Refrigerants Exposed to Hot Air Flow”, Twelve International Conference on Thermal Engineering: Theory and Applications, 2019, India.
21	Humam M., Mustafa A. abdulhussain “Drag Investigation Around A Cylinder and Symmetric Airfoil in Trandem With Different Gaps and Angles of Attack”, Journal of Mechanical Engineering Research and Developments, 42(1) (2019) 26-33.
22	Mahir Faris Abdullah, Humam kareem, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon, W. Ghopa “Heat Transfer and Flow Structure of Multiple Jet Impingement Mechanisms on a Flat Plate for Turbulent Flow”, International Journal of Mechanical & Mechatronics Engineering, Vol:19. No:03, 2019.
23	H.A. Abdul Wahhab, M.A. Mashkour, S.A. Madodi “Investigation of Water-Diesel Emulsion Characteristics using Optical Technique”, Journal of Applied Fluid Mechanics, Vol. 13, No. 1, pp.349-355, 2020.
24	Muna S. Kassim, Wajeeh Kamal Hasan, Hasanen Mohammed Hussen, Laith jaafer Habeeb “Experimental and Numerical Study in Horizontal Tube by using Swirl Device”, Journal of Engineering and Applied Sciences 14(14): 4905-4918, 2019.
25	Alaa Abdulhady Jaber, Firas Khalil Ibrahim Al-Mousawi, Hayder Sabeeh Jasem, "Internet of Things Based Industrial Environment Monitoring and Control: a Design Approach", International Journal of Electrical and Computer Engineering (IJECE), Vo.9, No.6, December 2019, pp. 4657-4667.
26	Alaa Abdulhady Jaber, Khalid Mohsin Ali, "Artifical Neural Network Based Fault Diagnosis of a Pulley-Belt Rotating System", Internation ournal on Advanced Science Engineering Information Technology, Vol.9, No.2, 2019.